1: #ifndef lint
   2: static char sccsid[] = "@(#)va820.c	4.3 (Berkeley) 10/10/85";
   3: #endif
   4: 
   5: #include "../condevs.h"
   6: #ifdef  VA820
   7: 
   8: /*
   9:  * Racal-Vadic 'RV820' with 831 adaptor.
  10:  * BUGS:
  11:  * dialer baud rate is hardcoded
  12:  */
  13: #define MAXDIG 30   /* set by switches inside adapter */
  14: char    c_abort = '\001';
  15: char    c_start = '\002';
  16: char    c_empty = '\017';
  17: char    c_end   = '\003';
  18: 
  19: va820opn(ph, flds, dev)
  20: char *ph, *flds[];
  21: struct Devices *dev;
  22: {
  23:     register int va, i, child;
  24:     char c, acu[20], com[20];
  25:     char vadbuf[MAXDIG+2];
  26:     int nw, lt;
  27:     unsigned timelim;
  28:     struct sgttyb sg;
  29: 
  30:     child = -1;
  31:     if (strlen(ph) > MAXDIG) {
  32:         DEBUG(4, "BAD PHONE NUMBER %s\n", ph);
  33:         logent("rvadopn", "BAD PHONE NUMBER");
  34:         i = CF_DIAL;
  35:         goto ret;
  36:     }
  37: 
  38:     if (setjmp(Sjbuf)) {
  39:         logent("rvadopn", "TIMEOUT");
  40:         i = CF_DIAL;
  41:         goto ret;
  42:     }
  43:     DEBUG(4, "ACU %s\n", dev->D_calldev);
  44:     DEBUG(4, "LINE %s\n", dev->D_line);
  45:     sprintf(acu, "/dev/%s", dev->D_calldev);
  46:     getnextfd();
  47:     signal(SIGALRM, alarmtr);
  48:     alarm(10);
  49:     va = open(acu, 2);
  50:     alarm(0);
  51:     next_fd = -1;
  52:     if (va < 0) {
  53:         DEBUG(4, "ACU OPEN FAIL %d\n", errno);
  54:         logent(acu, "CAN'T OPEN");
  55:         i = CF_NODEV;
  56:         goto ret;
  57:     }
  58:     /*
  59: 	 * Set speed and modes on dialer and clear any
  60: 	 * previous requests
  61: 	 */
  62:     DEBUG(4, "SETTING UP VA831 (%d)\n", va);
  63:     ioctl(va, TIOCGETP, &sg);
  64:     sg.sg_ispeed = sg.sg_ospeed = B1200;
  65:     sg.sg_flags |= RAW;
  66:     sg.sg_flags &= ~ECHO;
  67:     ioctl(va, TIOCSETP, &sg);
  68:     DEBUG(4, "CLEARING VA831\n", 0);
  69:     if ( write(va, &c_abort, 1) != 1) {
  70:         DEBUG(4,"BAD VA831 WRITE %d\n", errno);
  71:         logent(acu, "CAN'T CLEAR");
  72:         i = CF_DIAL;
  73:         goto ret;
  74:     }
  75:     sleep(1);           /* XXX */
  76:     read(va, &c, 1);
  77:     if (c != 'B') {
  78:         DEBUG(4,"BAD VA831 RESPONSE %c\n", c);
  79:         logent(acu, "CAN'T CLEAR");
  80:         i = CF_DIAL;
  81:         goto ret;
  82:     }
  83:     /*
  84: 	 * Build the dialing sequence for the adapter
  85: 	 */
  86:     DEBUG(4, "DIALING %s\n", ph);
  87:     sprintf(vadbuf, "%c%s<%c%c", c_start, ph, c_empty, c_end);
  88:     timelim = 5 * strlen(ph);
  89:     alarm(timelim < 30 ? 30 : timelim);
  90:     nw = write(va, vadbuf, strlen(vadbuf)); /* Send Phone Number */
  91:     if (nw != strlen(vadbuf)) {
  92:         DEBUG(4,"BAD VA831 WRITE %d\n", nw);
  93:         logent(acu, "BAD WRITE");
  94:         goto failret;
  95:     }
  96: 
  97:     sprintf(com, "/dev/%s", dev->D_line);
  98: 
  99:     /* create child to open comm line */
 100:     if ((child = fork()) == 0) {
 101:         signal(SIGINT, SIG_DFL);
 102:         open(com, 0);
 103:         sleep(5);
 104:         _exit(1);
 105:     }
 106: 
 107:     DEBUG(4, "WAITING FOR ANSWER\n", 0);
 108:     if (read(va, &c, 1) != 1) {
 109:         logent("ACU READ", _FAILED);
 110:         goto failret;
 111:     }
 112:     switch(c) {
 113:     case 'A':
 114:         /* Fine! */
 115:         break;
 116:     case 'B':
 117:         DEBUG(2, "Line Busy / No Answer\n", 0);
 118:         goto failret;
 119:     case 'D':
 120:         DEBUG(2, "Dialer format error\n", 0);
 121:         goto failret;
 122:     case 'E':
 123:         DEBUG(2, "Dialer parity error\n", 0);
 124:         goto failret;
 125:     case 'F':
 126:         DEBUG(2, "Phone number too long\n", 0);
 127:         goto failret;
 128:     case 'G':
 129:         DEBUG(2, "Modem Busy\n", 0);
 130:         goto failret;
 131:     default:
 132:         DEBUG(2, "Unknown MACS return code '%c'\n", c&0177);
 133:         goto failret;
 134:     }
 135:     /*
 136: 	 * open line - will return on carrier
 137: 	 */
 138:     if ((i = open(com, 2)) < 0) {
 139:         if (errno == EIO)
 140:             logent("carrier", "LOST");
 141:         else
 142:             logent("dialup open", _FAILED);
 143:         goto failret;
 144:     }
 145:     DEBUG(2, "RVADIC opened %d\n", i);
 146:     fixline(i, dev->D_speed);
 147:     goto ret;
 148: failret:
 149:     i = CF_DIAL;
 150: ret:
 151:     alarm(0);
 152:     if (child != -1)
 153:         kill(child, SIGKILL);
 154:     close(va);
 155:     while ((nw = wait(&lt)) != child && nw != -1)
 156:         ;
 157:     return i;
 158: }
 159: 
 160: va820cls(fd)
 161: register int fd;
 162: {
 163: 
 164:     DEBUG(2, "RVADIC close %d\n", fd);
 165:     close(fd);
 166: }
 167: #endif VA820

Defined functions

va820cls defined in line 160; never used
va820opn defined in line 19; never used

Defined variables

c_abort defined in line 14; used 1 times
  • in line 69
c_empty defined in line 16; used 1 times
  • in line 87
c_end defined in line 17; used 1 times
  • in line 87
c_start defined in line 15; used 1 times
  • in line 87
sccsid defined in line 2; never used

Defined macros

MAXDIG defined in line 13; used 2 times
Last modified: 1987-02-17
Generated: 2016-12-26
Generated by src2html V0.67
page hit count: 3524
Valid CSS Valid XHTML 1.0 Strict