|
Generated: 2016-12-26 |
Generated by man2html V0.25
page hit count: 1329 |
|
REMOTE(5) UNIX Programmer's Manual REMOTE(5) NAME remote - remote host description file DESCRIPTION The systems known by tip(1C) and their attributes are stored in an ASCII file which is structured somewhat like the termcap(5) file. Each line in the file provides a descrip- tion for a single system. Fields are separated by a colon (``:''). Lines ending in a \ character with an immediately following newline are continued on the next line. The first entry is the name(s) of the host system. If there is more than one name for a system, the names are separated by vertical bars. After the name of the system comes the fields of the description. A field name followed by an `=' sign indicates a string value follows. A field name fol- lowed by a `#' sign indicates a following numeric value. Entries named ``tip*'' and ``cu*'' are used as default entries by tip, and the cu interface to tip, as follows. When tip is invoked with only a phone number, it looks for an entry of the form ``tip300'', where 300 is the baud rate with which the connection is to be made. When the cu inter- face is used, entries of the form ``cu300'' are used. CAPABILITIES Capabilities are either strings (str), numbers (num), or boolean flags (bool). A string capability is specified by capability=value; e.g. ``dv=/dev/harris''. A numeric capa- bility is specified by capability#value; e.g. ``xa#99''. A boolean capability is specified by simply listing the capa- bility. at (str) Auto call unit type. br (num) The baud rate used in establishing a connection to the remote host. This is a decimal number. The default baud rate is 300 baud. cm (str) An initial connection message to be sent to the remote host. For example, if a host is reached through port selector, this might be set to the appropriate sequence required to switch to the host. cu (str) Call unit if making a phone call. Default is the same as the `dv' field. di (str) Disconnect message sent to the host when a disconnect is requested by the user. du (bool) This host is on a dial-up line. Printed 11/26/99 May 15, 1985 1 REMOTE(5) UNIX Programmer's Manual REMOTE(5) dv (str) UNIX device(s) to open to establish a connection. If this file refers to a terminal line, tip(1C) attempts to perform an exclusive open on the device to insure only one user at a time has access to the port. el (str) Characters marking an end-of-line. The default is NULL. `~' escapes are only recognized by tip after one of the characters in `el', or after a carriage-return. fs (str) Frame size for transfers. The default frame size is equal to BUFSIZ. hd (bool) The host uses half-duplex communication, local echo should be performed. ie (str) Input end-of-file marks. The default is NULL. oe (str) Output end-of-file string. The default is NULL. When tip is transferring a file, this string is sent at end-of-file. pa (str) The type of parity to use when sending data to the host. This may be one of ``even'', ``odd'', ``none'', ``zero'' (always set bit 8 to zero), ``one'' (always set bit 8 to 1). The default is even parity. pn (str) Telephone number(s) for this host. If the tele- phone number field contains an @ sign, tip searches the file /etc/phones file for a list of telephone numbers; c.f. phones(5). tc (str) Indicates that the list of capabilities is con- tinued in the named description. This is used pri- marily to share common capability information. Here is a short example showing the use of the capability continuation feature: UNIX-1200:\ :dv=/dev/cau0:el=^D^U^C^S^Q^O@:du:at=ventel:ie=#$%:oe=^D:br#1200: arpavax|ax:\ :pn=7654321%:tc=UNIX-1200 FILES /etc/remote SEE ALSO tip(1C), phones(5) Printed 11/26/99 May 15, 1985 2
|
Generated: 2016-12-26 |
Generated by man2html V0.25
page hit count: 1329 |
|